AlTiB in the system is made with 1 electric motor reducer group and speed control is provided by motor drive. The motor speed controlled (feeding speed) is controlled manually or automatically via PLC in the control panel, which can be adjusted according to the density alloy. The wire feeder has two feeders and is feeding automatically by double the other headed wire speed, in case of any one stop or feeder. Feeding speed is measured with 1 piece encoder. Feed speed OP is displayed during casting. The system provides light and voice alarm if the feeding stops during casting or ends of one of the channels.
Wire feeding system | Dual bar feeding at variable speed | Feeding speed max. | 500cm/min (double wire feeding) | Feeding speed min. | 100cm min (double feeding) | Feeding motor | 0. 37kW 5 d/d | Speed control | With Engine Driver | Wire feeder sizes | Gen 750 x uz 920 x load 1900 | Wire Angle Dimensions | Gen 1200 x uz 1355x Load 1360 | ATİB wire diameter | 9.7mm +0.30mm | Kangal inner diameter | 3 60mm+10mm | Kangal outer diameter | 715mm+50mm | Coil width | 300mm+25mm | Coil weight | 1 90kg±25kg |